NeoDen5 without rails version
NeoDen5 is the updated model on condition of NeoDen4, used to place most normal components on market.
It features four heads, full vision, and support max. 38x8mm feeders, auto rails (with extension ) and feeder updated to electronic all-in-one feeders.
Highlights
1.Four Precision Cameras
The up-looking camera will be used 4 cameras,to save the time while photographing,ensure higher production capacity finally;
2. Patented Accurate and Dependable Tape Feeders
Ultra-smooth electronic actuation and tape advance greatly reduce the feeding deviation
3. Four Precision Heads
4 high-precision placement heads with ±180° rotation that adopts suspended, fully symmetric and high degree
of coupling way, to ensure it can mount components with higher space, more gentle and more accurate
4.Auto Rails Achieve Continuous Placement
1.5m auto rails could be connected with universal conveyors to achieve continuous placement
5. Integrated Controller
Main-control box be installed inside, easier to do maintenance in future. If with some big problem inside, it will show a related error code on the box panel to help after-sales service team to get analysis what the problem is.
6. General Conveyor is supported
With a conveyor port, One-Stop SMT production line can be setup, which is more time-saving and labor-saving
7. Tricolour light
Tricolour light be quipped on the machine,green light indicates machine working normally,yellow light indicates machine in stand-by condition,red light indicates machine have some problems, blue indicates that user can set some parameters himself.
Specifications
Model |
NeoDen5 without rail version |
||
Machine style |
Single gantry with 4 heads |
||
Alignment |
Stage Vision |
||
Placement Rate |
Vision off |
7,000CPH |
|
Vision on |
5,000CPH |
||
Feeder Capacity |
Tape feeder:38(all 8mm) |
||
Vibration feeder:5 |
|||
Tray feeder:5 |
|||
Component Range |
Smallest Size |
0402(01005 inch) |
|
Largest Size |
32x32mm (Lead Pitch 0.5mm) |
||
Max Height |
4mm |
||
Rotation |
±180° |
||
Placement Accuracy |
±0.05mm |
||
X-Y Repeatability |
±0.02mm |
||
Board Dimension(mm) |
Maximum |
310 x 1500mm(if with rails) |
|
Minimum |
350 x 400mm(Option) |
||
140 x1500mm(Option, if with rails) |
|||
Main Control |
GUI |
||
Electricity Supply |
110V/220V |
||
Power |
200W |
||
External Dimensions(mm) |
Machine size |
700(L)x660(W)x560(H) |
|
Packing size |
940(L)x750(W)x720(H) |
||
Weight |
Net Weight |
68kgs |
|
Gross weight |
87kgs |
http://www.neodensmt.com/